<< Click to Display Table of Contents >>

Navigation:  Analysis >


After performing the calculation, the main results are displayed in the Results panel, which is activated only after the calculation. The screen appears as follows.



In the right-hand box, the following results are plotted on the model representation:

Stress in the nails

Effective length of the nails

Rupture check

Pull-out check


These results can be plotted with reference to different excavation phases. The excavation phase for plotting the outputs can be selected from the drop-down menu at the top of the left column in the Results panel. In this column, stress and strain graphs with depth are also plotted.


For more details on the calculation output, you can print the calculation report, which is selectable from the OUTPUT panel.



As evident from this figure, the software also allows for the export of geometry in DXF or into the SLOPE software to perform global stability checks.