After performing calculation (Checks Tab) you can display and/or change stirrups in the Stirrups-Ductility Tab window. In the below figure is shown an example of a rectangular column section designed for seismic zone with two hoops and two cross-ties as transverse reinforcement.
Options, text boxes and graphic commands are provided in the dialog box to change the initial proposal for hoops and cross-ties. For each change you make program performs an immediate shear check showing in the upper frame if it is Ok or Not:
The commands in Tab bar are (from left to rigth):
- 
Print numerical results for ductility check. Not active in the present stirrups display.
- 
Print preview. Capture the image present in the main window and paste it in the Microsoft XPS Document Writer (useful to print the diagram directly on paper)
- 
Copy. This command copy the image at moment displayed in the main window in the clipboard memory so you can paste it in any document you want.
- 
This command generate a dxf file of the image at moment displayed in the main window.
Diameter and pitch of hoops may be changed in the corresponding text-boxes.
Cross-ties can be also generated typing in the grid (or type 0 to erase).